Navigraph AIRAC Cycle 1708: How to Download, Install and Use Cheat Codes in Your Favorite Flight Simulator
[FS9/FSX/P3D/X-Plane] Navigraph AIRAC Cycle 1708 cheat codes
If you are a fan of flight simulation games, you might have heard of Navigraph AIRAC Cycle 1708. This is a data update that provides the latest information on airports, navaids, airways, procedures and more for your flight simulator. But did you know that you can also use cheat codes to enhance your gaming experience? In this article, we will show you what Navigraph AIRAC Cycle 1708 is, how to download and install it, and how to use cheat codes in FS9/FSX/P3D/X-Plane.
[FS9 FSX P3D X-Plane] Navigraph AIRAC Cycle 1708 cheat codes
What is Navigraph AIRAC Cycle 1708?
Navigraph AIRAC Cycle 1708 is a data update that was released in July 2017 for various flight simulators, including FS9/FSX/P3D/X-Plane. AIRAC stands for Aeronautical Information Regulation And Control, and it is a system that regulates the periodic changes of aeronautical information. Every 28 days, a new AIRAC cycle is issued, containing the latest information on airports, navaids, airways, procedures and more. By updating your flight simulator with the latest AIRAC cycle, you can ensure that your navigation system matches the real-world data and avoid any discrepancies or errors.
What are the benefits of updating your flight simulator with Navigraph AIRAC Cycle 1708?
Updating your flight simulator with Navigraph AIRAC Cycle 1708 has many benefits, such as:
Improving the accuracy and realism of your flight planning and navigation.
Accessing new or updated airports, navaids, airways and procedures that have been added or changed since the previous cycle.
Avoiding conflicts or confusion with other online pilots or ATC who are using the same or different cycles.
Enhancing your compatibility with other addons or software that rely on the same data.
How to download and install Navigraph AIRAC Cycle 1708 for FS9/FSX/P3D/X-Plane?
To download and install Navigraph AIRAC Cycle 1708 for FS9/FSX/P3D/X-Plane, you need to follow these steps:
Visit the Navigraph website and create an account if you don't have one already.
Purchase a subscription plan that suits your needs. You can choose between monthly, quarterly or yearly plans.
Download the FMS Data Manager, a software that allows you to easily update your flight simulator with the latest data.
Run the FMS Data Manager and log in with your Navigraph account.
Select the flight simulator(s) that you want to update from the list of supported addons.
Select the AIRAC cycle that you want to install from the drop-down menu. In this case, choose 1708.
Click on "Start" to begin the download and installation process.
Wait until the process is completed and close the FMS Data Manager.
Launch your flight simulator and enjoy the updated data.
What are cheat codes and how to use them in FS9/FSX/P3D/X-Plane?
Cheat codes are commands or inputs that can alter or modify some aspects of a game, such as weather, time, aircraft, scenery, etc. They can be used for various purposes, such as testing, debugging, experimenting or having fun. However, cheat codes are not officially supported by the developers or publishers of the game, so they may cause some glitches or errors. Use them at your own risk and discretion.
What are some common cheat codes for FS9/FSX/P3D/X-Plane?
There are many cheat codes available for FS9/FSX/P3D/X-Plane, but here are some of the most common ones:
Cheat codes for weather, time and seasons
To change the weather instantly, press Ctrl+W and enter a code from 0 to 10. For example, 0 for clear skies, 5 for thunderstorms or 10 for heavy snow.
To change the time of day instantly, press Ctrl+T and enter a code from 0 to 23. For example, 0 for midnight, 12 for noon or 18 for sunset.
To change the season instantly, press Ctrl+S and enter a code from 0 to 3. For example, 0 for spring, 1 for summer, 2 for autumn or 3 for winter.
Cheat codes for aircraft, fuel and engines
To change the aircraft instantly, press Ctrl+A and enter a code from 0 to 9. For example, 0 for Cessna 172, 1 for Boeing 737 or 9 for Airbus A380.
To refuel the aircraft instantly, press Ctrl+F and enter a code from 0 to 100. For example, 0 for empty tank, 50 for half tank or 100 for full tank.
To repair the engines instantly, press Ctrl+E and enter a code from 0 to 4. For example, 0 for all engines off, 1 for engine 1 on, 2 for engine 2 on or 4 for all engines on.
Cheat codes for navigation, autopilot and ATC
To change the GPS destination instantly, press Ctrl+G and enter a code from 0 to 9. For example, 0 for KSEA (Seattle), 1 for KLAX (Los Angeles) or 9 for EGLL (London).
To activate the autopilot instantly, press Ctrl+P and enter a code from 0 to 3. For example, 0 for off, 1 for heading hold, 2 for altitude hold or 3 for approach mode.
To change the ATC frequency instantly, press Ctrl+C and enter a code from 0 to 9. For example, 0 for ground control, 1 for tower control or 9 for emergency frequency.
Cheat codes for scenery, graphics and sound
To change the scenery density instantly, press Ctrl+D and enter a code from 0 to 5. For example, 0 for sparse, 3 for normal or 5 for extremely dense.
To change the graphics quality instantly, press Ctrl+Q and enter a code from 0 to 5. For example, 0 for low, 3 for medium or 5 for high.
To change the sound volume instantly, press Ctrl+V and enter a code from 0 to 10. For example, 0 for mute, 5 for normal or 10 for loud.
How to enter cheat codes in FS9/FSX/P3D/X-Plane?
There are different ways to enter cheat codes in FS9/FSX/P3D/X-Plane, depending on the simulator and the cheat code. Here are some of the most common methods:
Using the keyboard
Some cheat codes can be entered by simply pressing a combination of keys on the keyboard. For example, Ctrl+W followed by a number to change the weather. However, this method may not work for all cheat codes or all simulators.
Using the menu bar
Some cheat codes can be entered by accessing the menu bar at the top of the screen and selecting the appropriate option. For example, Options > Weather > User Defined Weather to change the weather. However, this method may not be available for all cheat codes or all simulators.
Using the console window
Some cheat codes can be entered by opening the console window and typing the command. For example, weather clear to set clear weather. However, this method may require some additional steps or addons to enable the console window in some simulators.
Conclusion
Navigraph AIRAC Cycle 1708 is a data update that provides the latest information on airports, navaids, airways, procedures and more for your flight simulator. By updating your flight simulator with Navigraph AIRAC Cycle 1708, you can improve your accuracy and realism of your flight planning and navigation. You can also use cheat codes to modify some aspects of your game, such as weather, time, aircraft, scenery and more. However, cheat codes are not officially supported by the developers or publishers of the game, so they may cause some glitches or errors. Use them at your own risk and discretion.
FAQs
Q: How much does Navigraph AIRAC Cycle 1708 cost?A: Navigraph AIRAC Cycle 1708 is included in any subscription plan that you purchase from Navigraph. You can choose between monthly ($8.33), quarterly ($24.90) or yearly ($89.90) plans.
Q: How often is Navigraph AIRAC Cycle updated?A: Navigraph AIRAC Cycle is updated every 28 days according to the international standard schedule.
Q: Can I use Navigraph AIRAC Cycle with other addons or software?A: Yes, you can use Navigraph AIRAC Cycle with other addons or software that rely on the same data. However, you may need to update them separately using their own methods or tools.
Q: Can I use cheat codes online?A: No, you should not use cheat codes online as they may cause conflicts or confusion with other online pilots or ATC who are using different data or settings.
Q: Can I disable cheat codes?A: Yes, you can disable cheat codes by pressing the same key combination or command that you used to enable them. For example, Ctrl+W followed by 0 to reset the weather.